Home / Shop / Lighting / Furniture Lighting 12-24V / GLAX Profiles / Special profiles / Profile GLAX MINI for LED strip, for shelves, 2 m

Lighting / Furniture Lighting 12-24V / GLAX Profiles / Special profiles

Profile GLAX MINI for LED strip, for shelves, 2 m

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The shelf profile can be used both with glass shelves and made of wood or furniture board. The profile is mounted with double-sided tape to the surface of the shelf. The shelf itself should be moved away from the back of the cabinet by 17.2 mm. For glass shelves, up to 3 LED strips can be used. One shines upwards, the other downwards and the third through the glass, giving an amazing light splitting effect.

Unit Price (not inc. VAT.):

€14,43

In Stock

Est. Delivery: 48 Hours

SKU: PA-GLAXMPK-AL

Furnituur SKU: LP01.2.AL

Description

The current trend is to move away from light points in favor of linear lighting, based on LED strips.
During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center.
The shelf profile can be used both with glass shelves and made of wood or furniture board. The profile is mounted with double-sided tape to the surface of the shelf. The shelf itself should be moved away from the back of the cabinet by 17.2 mm.
For glass shelves, up to 3 LED strips can be used. One shines upwards, the other downwards and the third through the glass, giving an amazing light splitting effect.

Effectively dissipates the heat generated by the LED strip;
Dedicated milk casing PA-OSMLGLAXM-00;
Dedicated transparent casing PA-OSTRGLAXM-00;
The maximum width of the LED strip is 10 mm.

Specifications:

Application: Kitchen, Living Room, Dressing Room, Shop | Instruction of installation: shelf | Producer: GTV Poland S.A., ul. Przejazdowa 21, 05-800 Pruszków, Poland, [email protected] +48 22 444 75 00 | Material: aluminium/cast iron

Resources

Product card

Technical data sheet

Solid 3d stp

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Profile GLAX MINI for LED strip, for shelves, 2 m”

Recommended Items

SKU: LD-ZTL82MAMP-COB€2,76

Transparent connectors for COB LED strips with cable 2 m, mini AMP male

The connector is an excellent solution for powering LED strips. This connector allows you to connect the LED strip without having to solder the wires. The 2-meter cable on one side has a connector to which the tape is plugged, on the other side there is a mini AMP plug, which can be easily connected to the switch or power supply.

SKU: AE-WBSK-DOOR-20€14,88

SKY DOOR wireless switch for 12V/24V power supply system

SKY DOOR is a wireless, compact switch that automatically activates the lighting when the door is opened. Ideal for kitchen, bathroom, dressing room or bedroom furniture, it provides comfort of use without visible wires and complicated installations. It can be paired with a 12V and 24V LED light fixture or LED strip. The elegant, black housing in the form of a magnetic cassette allows you to discreetly hide the mechanism – the switch is recessed into the furniture board and subtly flushes with its surface. It does not interfere with use and remains virtually invisible. SKY DOOR is one of the elements of the SKY furniture lighting stress system, which includes 5 independent wireless switches. It is a smart and professional solution that adds functionality and modern character to furniture - ideal when comfort, aesthetics and quick assembly are important. See, how SKY works!

SKU: AE-WBSK-KON-20€24,03

Signal receiver for SKY system, 8A, 12V/96W,24V/192W, 1m cable with mini amp

The SKY connector is the heart of the SKY furniture lighting sting system, which consists of 5 independent wireless switches. It is responsible for wireless communication between switches and lighting. Stable and compact, it allows you to build a convenient light control system in furniture and rooms. The receiver supports as many as 6 independent channels, each of which can be paired with up to 4 emitters. Ideal for complex installations: large cabinets, kitchen islands, living room cabinets or systems with multiple light points. The SKY controller is one of the key components of the SKY furniture lighting control system, which consists of 5 independent wireless switches. See, how SKY works!

SKU: LD-ZTKT8-COB€1,32

Transparent corner connector for COB LED strips

The CX11 connector is an ideal solution that allows you to connect two sections of LED strips in the corners of furniture furniture. This fitting fits COB tapes.

SKU: PA-OSMLGLAX-00€3,35

Diffuser, for profile GLAX, milky, 2 m

Milky cover for LED profiles is an accessory that can be used to diffusion the light emitted by the LED strip. Such a cover allows for even diffusion of light, which can be especially useful when we want to get a soft, even light.

SKU: LD-2835-300-20-CBN€8,60

LED strip 2835, DC12V, 300LED/5m, 11 W/m, 850 lm/m, 3200K, IP20, roll 5 m

The current trend is to move away from light points in favour of linear lighting, which is based on LED strips. LED strips are popular due to their low price and proven quality. Of course, their reliability largely depends on carefully carried out installation. During operation, the strip generates heat that must be dissipated from it. Otherwise, the strip may wear out prematurely. Special GLAX aluminium profiles are used to dissipate heat from the strip. In order to effectively dissipate heat from the strip to the aluminium profile, the strip must adhere to it with its entire surface. Therefore, before gluing the LED strip into the GLAX profile, its centre should be degreased. LED strips find a wide range of applications both in homes and office spaces. They can be used to illuminate the kitchen, wardrobe, reception, showcases and even walls and ceilings. 2835 LED strip with its entire length, i.e. 5 m, consumes 33 W, while 1 meter consumes only 11 W. The strip can be cut every 5 cm, remembering to make the cut in a specially marked place. An important parameter of LED strips is the density of LEDs arrangement. The more densely they are arranged, the more even line of light will be obtained. In this case, 300 LEDs are arranged along the entire length of the strip, i.e. 60/m. Attention should also be paid to the width of the LED strip so that it can be easily glued it into the profile. This index is 8 mm wide.

SKU: LZ-AKZ312-10N€2,59

Splitter 3 x mini AMP, 2 m

The connector for LED lighting with a 2 meter long cable on one side is terminated with a distributor with three mini AMP sockets, on the other side there is a mini AMP plug.

SKU: AE-WBSK-PIL-20€15,66

SKY Wireless Switch with Dimmer PILOT RF for 12V/24V Power System

The RF SKY remote control with dimmer provides convenient and precise control of the lighting in the room. Ideal for LED strips, luminaires, lamps and all furniture lighting – from the kitchen, through dressing rooms, to living room furniture. Thanks to RF technology, the remote control works within a range of up to 10 meters , does not require aiming and communicates easily through furniture or walls. This is a comfort that every user will appreciate – the light reacts immediately, exactly as you expect it. YSTEM offers great configuration flexibility: one receiver can be paired with up to 8 transmitters , one remote control can control multiple receivers at the same time. This makes the SKY RF great for both single pieces of furniture and larger light installations. The switch is inserted into the mounting plate, which can be fixed vertically – on the wall or directly in the furniture panel. It blends perfectly with the surface, offering comfort and a modern look. The SKY RF remote control means maximum convenience, flexible configuration and full control of the light in any interior – no wires, no complications. The remote control is one of the elements of the SKY furniture lighting stress system, which consists of 5 independent wireless switches. See, how SKY works!